Kontakt oss for tilbud!
This three-way active studio monitor is designed to provide critical reference monitoring for the most demanding applications.
As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.
The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.
Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.
PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.
- Active 3-way nearfield reference monitor with ATL™ bass loading
- Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
- Max. cont. SPL: 113dB @1m (half space value calculated as +3dB from full space measurement.
Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
- Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- PMC8-2 + PMC8-2 SUB creates PMC8-2 XBD, with up to 6dB of additional headroom
- Optional dedicated floor stands for PMC8-2 (40”) and PMC8-2 XBD (19”)
TypeActive 3-way nearfield reference monitor with ATL™ bass loading Drive Unit Complement
LF 2 x PMC 200mm (8”) studio 8 drivers
MF PMC 55mm (2”) soft dome mid-range
HF PMC 27mm (1”) soft dome tweeter
Effective ATL™ Length3m (9.8ft)
Frequency Response25Hz - 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity+4dBu input signal = 98dB SPL @ 1m Max continuous SPL113dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL125dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) DirectivityH+/-45 degrees V+/-50 degrees (-6dB off axis @10kHz)
InputXLR switchable between analogue & digital AES3 Analogue input- +20/+24dBu max. input level (selectable) - 22K ohm input impedance Digital input- 16/24-bit AES3 signal, left, right or left + right - 18 - 192kHz Sample Rate - 110 ohm input impedance
Expansion card slot- For future connectivity upgrades OutputXLR digital AES3 (fixed 24-bit @ 96kHz) NetworkRJ45 for use with PMC SoundAlign web interface FeaturesLevel Trim (+/-10dB) High-pass filter (20 - 200Hz, 12dB/Oct) Delay (0 - 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB) User presets (3 + factory defaults) Latency2.4mS
Amplifier power per channel
LF 2 x 400Wrms
MF 1 x 400Wrms
HF 1 x 400Wrms
Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle)50W Power consumption (max)1500W
Cabinet dimensionsH 534mm (21”) W 551mm (21.7”) D 440mm (17.3”) Weight39kg (86lbs) each Available Finishes: Studio black
https://pmc-speakers.com/studio/pmc-8-2
Our products are also found at all levels of the professional music recording, audio post-production and broadcast industries. From the bedroom studios of the 'next big things' to the acoustically treated hush of the world's finest outside broadcast vehicles, movie soundstages, recording and mastering studios, and from the project studios of big-name stars and their producers and engineers to the boardrooms and listening stations at major record companies, our products are woven into the fabric of the audio business.
PMC's loudspeakers are a full-range proposition, in every sense of the word. Our products for music and audio professionals extend from compact passive monitors at one end of the spectrum to multi-driver active speakers at the other, and cover all points in between, including cutting-edge analogue and digitally amplified models with DSP.
