Kontakt oss for tilbud!
NB:Egen fraktmetode må avtales for disse!
Vi tar også inbytte av kurante studiomonitorer!
https://www.soundonsound.com/reviews/pmc6-2
A serious near/midfield monitoring tool that fits easily within any control room or immersive system, the PMC6-2 is unmatched in its outstanding clarity, forensic resolution, and sheer impact.
The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.
This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.
The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.
A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.
- Active 3-way nearfield reference monitor with ATL™ bass loading
- Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
- Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) - State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
- Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
- Ceiling-mount yoke allows suspension in multi-channel or immersive systems
TypeActive 3-way nearfield reference monitor with ATL™ bass loading Drive Unit Complement
LF 2 x PMC 150mm (6”) studio 6 drivers
MF PMC 55mm (2”) soft dome mid-range
HF PMC 27mm (1”) soft dome tweeter
Effective ATL™ Length2m (6.6ft)
Frequency Response 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity+4dBu input signal = 98dB SPL @ 1m Max continuous SPL109dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration) Max Peak SPL121dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
DirectivityH +/-50 degrees V +60/-40 degrees (-6dB off axis @10kHz)
InputXLR switchable between analogue & digital AES3 Analogue input- +20/+24dBu max. input level (selectable) - 22K ohm input impedance Digital input- 16/24-bit AES3 signal, left, right or left + right - 18 - 192kHz Sample Rate - 110 ohm input impedance
Expansion card slot- For future connectivity upgrades OutputXLR digital AES3 (fixed 24-bit @ 96kHz) NetworkRJ45 for use with PMC SoundAlign web interface FeaturesLevel Trim (+/-10dB) High-pass filter (20 - 200Hz, 12dB/Oct) Delay (0 - 30mS) Phase (normal or inverted) LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707) Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB) User presets (3 + factory defaults) Latency2.4mS
Amplifier power per channel
LF 2 x 400Wrms
MF 1 x 400Wrms
HF 1 x 400Wrms
Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle)50W Power consumption (max)1500W
Cabinet dimensionsH 400mm (15.7”) W 430mm (16.9”) D 372mm (14.6”)
Weight21.3kg (47lbs) each
Available Finishes: Studio black
https://pmc-speakers.com/studio/pmc-6-2
Our products are also found at all levels of the professional music recording, audio post-production and broadcast industries. From the bedroom studios of the 'next big things' to the acoustically treated hush of the world's finest outside broadcast vehicles, movie soundstages, recording and mastering studios, and from the project studios of big-name stars and their producers and engineers to the boardrooms and listening stations at major record companies, our products are woven into the fabric of the audio business.
PMC's loudspeakers are a full-range proposition, in every sense of the word. Our products for music and audio professionals extend from compact passive monitors at one end of the spectrum to multi-driver active speakers at the other, and cover all points in between, including cutting-edge analogue and digitally amplified models with DSP.
