Hopp til innhold

Norsk nettbutikk | Rask levering | Frakt i hele Norge

Mikrofoner

Oppdag et bredt utvalg av mikrofoner til studio, podcast, streaming og livebruk. Her finner du alt fra kondensatormikrofoner til dynamiske mikrofoner – nøye utvalgt for profesjonell lydkvalitet og pålitelig ytelse.

Universal Audio SD-5 Dynamic ...

2.195,-

2.495,-

    Få basstromme og basstoner fra favorittepoken din. Fang all kraften og tyngden til basstrommene, bassforsterkerne og alt annet der det kreves utvidet low-end. En klassisk dynamisk mikrofon med et superkardioid polarmønster, høy SPL-håndtering og klassens beste Hemisphere-mikrofonmodellering – SD-5 gir deg proff lyd, uansett hvor du spiller inn.   Ta opp gjennom fem arbeidshester av noen basstrommemikrofoner SD-5 er drevet av den samme mikrofonmodelleringsteknologien som finnes i våre prisbelønte UA Sphere-mikrofoner. Med den medfølgende Hemisphere Mic Collection-programvaren er det den eneste dynamiske modelleringsmikrofonen som gir deg den autentiske lyden av kjente dynamikker fra Shure, Audix og AKG.* Har du allerede SD-5? Registrer mikrofonen din i dag for å få din gratis Hemisphere Mic Collection UAD-plugin.   Microphone Type Dynamic Polar Pattern Supercardioid Frequency Range 20 Hz - 15 kHz Sensitivity -64 dB (0 dB = 1V/Pa @ 1 kHz) Output Impedance 50 Ohms Connector 3-Pin XLRM Included Accessory Integrated standmount w/ angle adjustment, "⅝" to ⅜" thread adapter, storage pouch Dimensions 4.06"(103.2 mm) length, 5.61" (142.6 mm) Weight 1.6 lbs (727 g)
Warm Audio WA-44 Bundle With ...

13.065,-

15.290,-

NB:Ta kontakt for vår beste pris! Bundled with WA-WL, Warm Lifter - Inline Active Microphone Preamp. WA-44 The WA-44 is a faithful recreation of the most iconic studio ribbon microphone of all time, known for its warm, vintage, sultry tones.   _____   WA-44 är Warm Audios version av en av de mest ikoniska bandmikrofonen genom tiderna. Precis som de legendariska RCA 44-bandmikrofonerna från 1930-talet ger WA-44 dig det varma, sköna vintage-soudet. WA-44 har en väldigt riktad figur 8-polar pattern som eliminerar oönskat ljud från sidorna, specialdesignadat matchat vintage band(ribbon) och Neodymium magnet. Tillsammans med en CineMag-transformator levererar WA-44 en djupare, rikare basrespons och fylligare mellanregister och en fin mjuk diskant. Med premiumkomponenter och byggkvalitet i toppklass är WA-44 det perfekta valet för sång, blåsinstrument, akustiska stränginstrument, trummor, piano och mycket mer.
Golden Age Premier R1A Active ...

6.995,-

7.495,-

Description The R1A is a unique microphone since it is a high quality and low cost vintage style ribbon microphone with active electronics using high end components. The R1A offers the special and natural sound that has been available in classical microphones like the RCA 44 and 77 that are still used to make high quality recordings today after around 80 years. On top of that, the active circuitry raises the output level considerably to be similar to that of many condenser microphones. This has the good effect that one does not need special high gain microphone preamps when using the R1A on quiet sound sources. It also makes the R1A able to drive long microphone cables without any problems and insures that the sound is consistent with different preamps. One of the factors that usually changes the sound of passive ribbon microphones is the input impedance of the following microphone preamp. The active output circuitry in the R1A buffers the ribbon and the gain make-up transformer from the outside world and the result is that the R1A will consistently give you maximum performance in any situation. The R1A is very well suited for the recording of most sound sources like vocals, acoustic instruments, strings, horns, orchestras and choral groups and many live sound applications. In spite of its low cost, the R1A meets the most stringent demands. To get maximum benefit and trouble free use out of the R1A please read this manual carefully. FEATURES – The unmatched natural and musical sound of a classical ribbon microphone combined with a discrete amplifier (no integrated coircuits used), powered by standard 48V phantom power, that isolates the ribbon and the gain make-up transformer from the outside world. A stunning realism with the feeling of “being-there” and a fast and life-like transient reproduction. – The typical large and mellow ribbon sound quality with a very smooth top end and an extended low end. – An ultra-high SPL capability, 160 dB SPL (1% THD @ 1000Hz) and a very high sensitivity for a ribbon microphone, similar to many condenser microphones. – Figure-8 directional pattern for wide sweet spots both in the front and in the back of the microphone. – 50mm long ribbon made of 2 microns thick aluminium foil and an internal shock mount for the ribbon and magnet assembly. – Selectable high pass filter and -10dB Pad. – Removable microphone cable built with Mogami Neglex Studio Quad cable and Neutrik XLR goldplated connectors. – Swedish made Lundahl 1927A transformer. – High end Wima film and Nichicon electrolytic audio capacitors used in the amplifier. – Manufactured of the finest materials for a great performance and long-term reliability. – The R1A can be used with any standard mixer or preamp with a balanced input that can supply 48V phantom power. – Great sound that suits most sound sources and genres. – A solid build quality that will last many years of normal use. SPECIFICATIONS Type: Large ribbon geometry, pure aluminium, 2 um thick, 50 x 5 mm size with active electronics. Polar pattern: Figure 8 Frequency response: 30 Hz – 18 kHz +/- 3 dB Sensitivity: -40 dB (0 dB = 1V/Pa) @ 1 kHz Equivalent Noise Level (A-weighted per IEC 268-4): < 18 dB typical Maximum SPL (<1% THD @ 1 kHz): 160 dB. (with Pad engaged) Output impedance: 200 ohm, balanced Recommended load impedance: > 1000 Ohms Current consumption: 4 mA. Highpass filter: -3dB @160Hz, 6 dB/octave Pad: -10dB Dimensions: 69×185 mm. Weight: 820 g Download the R1A manual Check out Christian Svedins video!
Lewitt LCT 240 Pro Black

1.195,-

1.295,-

  Studio quality recordings made easy. The LCT 240 PRO sounds fantastic on all sources commonly used in a project studio situation like vocals, acoustic instruments, amplifiers, piano, etc. Whatever you record, you will accomplish great sounding results; fast and uncomplicated. Always on the safe side. No source is too loud or too subtle for the LCT 240 PRO. It can handle ear-shattering sound pressure levels up to 142 dBSPL. With its high sensitivity capsule it is able to reproduce every sound source in a clear and precise way at any volume. Used in high-end studios around the world. LEWITT microphones are being used for recording in countless studios around the world, like Atlantic Records in NYC, Echobar Studios in North Hollywood, Black Bird Studios in Nashville, Metropolis Studios in London, the list goes on and on. What’s in the box? The 240 PRO comes with a mic mount, a transport bag, and a windscreen that you can use to reduce plosives. Specifications             Frequency range:  20 … 20,000 Hz             Sensitivity: 16.7 mV/Pa, -35.5 dBV/Pa             Max. SPL for 0.5% THD: 142 dBSPL             Dynamic range: 123 dB (A)             Polar pattern: Cardioid             Included: Mic mount, windscreen, transport bag             Microphone enclosure: Zinc die cast             Microphone dimensions: 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in             Microphone net weight: 310 g, 10.9 oz Box contents             LCT 240 PRO – Condenser microphone             DTP 40 Mts - Microphone mount             LCT 40 Wx - Windscreen             DTP 40 Lb - Cushioned mic bag
Universal Audio SC-1 ...

5.595,-

6.295,-

    Universal Audio SC-1 Standard Condenser Microphone Get the sounds of the world's most famous mics with Hemisphere mic modeling. With the SC-1 microphone and Hemisphere mic modeling, you'll capture album-ready vocals and instruments with the authentic sound and character of the most popular studio mics ever made — all with a single pro-quality condenser.   Record Pro Vocals and Instruments  The SC-1 gives you classic condenser sound perfect for vocals, acoustic guitar, strings, even a loud guitar cab thanks to its high SPL handling. Plus, its ultra-linear circuit and extended dynamic range ensures distortion-free results in both low and high frequencies, giving you smooth results, everytime.     Authentic Mic Modeling Made Simple  Using the same award-winning tech as our UA Sphere modeling microphones, the included Hemisphere mic modeling plug-in gives your studio the authentic sound of essential condenser mics from Neumann, Sony, AKG, and more — in realtime with Apollo or natively in your DAW.* You can also shape the sound of your recordings using filter, proximity, and axis controls — even after tracking. 
Warm Audio WA-44

11.390,-

12.590,-

NB:Ta kontakt for vår beste pris!   WA-44 The WA-44 is a faithful recreation of the most iconic studio ribbon microphone of all time, known for its warm, vintage, sultry tones.   _____   WA-44 är Warm Audios version av en av de mest ikoniska bandmikrofonen genom tiderna. Precis som de legendariska RCA 44-bandmikrofonerna från 1930-talet ger WA-44 dig det varma, sköna vintage-soudet. WA-44 har en väldigt riktad figur 8-polar pattern som eliminerar oönskat ljud från sidorna, specialdesignadat matchat vintage band(ribbon) och Neodymium magnet. Tillsammans med en CineMag-transformator levererar WA-44 en djupare, rikare basrespons och fylligare mellanregister och en fin mjuk diskant. Med premiumkomponenter och byggkvalitet i toppklass är WA-44 det perfekta valet för sång, blåsinstrument, akustiska stränginstrument, trummor, piano och mycket mer.
Golden Age Premier GA-47 MK ...

22.995,-

26.995,-

NB:Velg frakt for stort kolli på denne!!! Golden Age Premier GA-47 MK II   High End, no compromise components and build quality Hand Made in small series, 50 units at a time Capsules selected with very tight tolerances Point-to point wiring, no printed circuit board used Solid wood microphone box, tweed style system flight case     The Neumann U-47 microphone is one of the most highly revered and sought after microphones of all times. Being a true classic, the U-47 really needs no further presentation.   Due the high cost and low availability of vintage originals, especially ones in good condition, a number of manufacturers are producing U-47 clones. The selling price of the clones are covering a broad price span, several of them are sold at high price points.   Any manufacturer putting a U-47 clone on the market is bound to get the same question: “Does it sound like a U-47?” My take is that this is the wrong question to ask, I would like to rephrase the question to: “Does it offer the classic qualities and advantages that a vintage U-47 in perfect condition do?”   The Neumann U-47 was produced between 1949 and 1965 meaning that the vintage original units are now very old and their performance do differ a lot depending on their condition. The different clones all have their specific sound character too. So, it´s not easy to say which sound is “the right one”. As always, not the least as far as microphones goes, it will ultimately be a matter of taste.    Does the world need one more U-47 clone? Since we are now presenting the GA-47 microphone as the first product in Golden Age Projects new high end line, changing “Project” to “Premier” for the this product range, the answer is “Yes!”.   After a lot of experimentation and valuable feedback from pro users testing prototype units, we did feel that it was indeed possible to bring something new to the table.    The Golden Age Premier GA-47 has been born from a lot of hard work and real world testing. The end result is a microphone with a very sweet character that should appeal to a great number of users and a microphone that can be used for the most demanding recording tasks. It has proved itself to be a great allrounder, this is not a “vocal-only” microphone.   The GA-47 is not a product that will be built in huge quantities on a big assembly line. It´s a product that is built by hand, fifty units at a time in a small workshop by a skilled and dedicated staff.  It uses very high quality components all the way to achieve the desired goal, allowing me to answer “yes!” to the rephrased question mentioned above.   I believe that the level of quality and dedication that the GA-47 provides normally comes at a very high cost, also in the world of U-47 clones. To make it available to many more users, we have decided to sell the GA-47 at a very competitive international price point of 1 500 USD. Bo Medin, December 2017     GA-47 build info   Mic body and grille The mic body is made of brass, the grille is made of iron. The grille, which is a critical component affecting the sound character, is similar to the one in the U47.    Capsule  The capsule for the GA-47 is designed to provide the requirements of modern day recordings by mixing the character between a vintage K47 capsule and the one from a K67-style capsule with a wide frequency response and high sensitivity. The result is a truly great sound. Being a dual-sided one, it provides the GA-47 with both cardioid and omni polar patterns. In order to get a good consistency between units, for each production run of 50 pcs GA-47 units, approximately 200 capsules is evaluated in order to find 50 capsules with specifications that lie within the tight tolerances. Specifications:  Backplate material: brass Capsule diameter: 35mm  Membrane diameter: 27mm  Membrane material:6 micron gold-coated mylar. The capsule is mounted in a special way to minimize the effect from physical vibrations. The sensitivity of the front and back side of the capsule do not differ more than 0,3 dB. The sensitivity between different capsules do not differ more than 0,5 dB. The tight manufacturing tolerance will lead to a very good consistency between different GA-47 units.    The capsule is specially designed to complement the electronic circuit of the GA-47 to achieve a frequency response curve with a nice balance between the high, middle and low frequencies.      Tube    The GA-47 uses a NOS Telefunken 800 series super low noise pentode tube connected in triode mode in order to decrease distorsion and noise. This tube is modern glass derivative of the VF14M used in the vintage U-47.    Output transformer   The GA-47 transformer is especially designed with a 6.5:1 dual bobbin transformer by a reputed transformer factory. It is a replica of the BV8 transformer used in the vintage U47. It uses a high quality core material.   Capacitors and resistors  The coupling capacitor is made in United Kingdom, the brand is Ciarit, the same type used in the famous and very expensive B&W Nautilus loudspeaker. It is an axial capacitor made from MKP material with copper pins.  It has a delicate, full sound and a wide frequency response.   Other used capacitors are MIAL polystyrene film capacitors with very low loss. The resistors are ALLEN BRADLEY carbon film resistors made in the USA with vintage and warm sound.   Mic interior and cabling The electronic circuit is mainly built with point-to point wiring and the ground connections are tied together using an insulated soldering. Teflon insulated, silver-plated copper wire is used for the internal connections.   Power supply transformer and electrolytic capacitors  The vintage style power supply PSU uses a high power R-style transformer with a low noise level and a minimal stray field. The electrolytic capacitors are of a high quality audio style type. A simple but effective circuit uses dual-stage filtering for the filament voltage. The high voltage is precisely filtered and stabilized using an ON semiconductor zener diode.   Mic cable  The cable is specially produced using 99,99% pure oxygen-free copper, teflon insulation, tin foil and 98% kitmesh, ie with a very high braided density of the cable shield. It has a very open and smooth sound.  The connectors are gold plated.    Mic and psu circuit in relation to the original mics  The polar pattern switch is located on the power supply allowing for easy sound comparisons. The circuit used in the GA-47 is similar to the U-47 but the component values has been adjusted to fit the EF800 tube. The circuit used for the power supply is also similar except for adding a zener diode to assure the voltage and current stable. The connectors are gold plated. All three connectors are placed on one side to facilitate handling and placement.      Specifications   Frequency Response: 20Hz?20KHz Sensitivity: 12mV/Pa Rated Impedance: 200 ohms Equivalent Noise Level: 10dB Max S.P.L: 140dB   The GA-47 is delivered in a tweed-style flight case with power supply, cable, shock mount and a box made of solid wood for the microphone. More pictures here         Incredible Testimony   Statement by George Murphy, head engineer at Eastcote Studios in London, about the new GA-47.   “My previous experiences with U47’s have of course always been amazingly positive. It’s one of my favourite microphones, whenever I work in any studio that has them, I’ll always have as many of them as they have out on the floor, ready to go.   They’re such a universal mic, it’s tough to record anything badly with one. I was very excited to be given this microphone to try out from Golden Age, and I’ve incorporated it into every session I’ve done since I’ve had it.    The first time I got it out, I was working with a female vocalist I’d never worked with before. Usually there’s routine for a new singer – we’ll put up a few different mics and have a little shoot out and see what sounds best. The first one we tried was the Golden Age 47 and that was the end of the test. Everybody in the room was happy; it sounded incredible. We got the singer in, had her have a listen back to it and you know, we couldn’t ask for anything more from the sound, straight away that was a good sign.   Since I’ve had the GA-47 in the studio it’s been on every session. I’ve tried it on so many different things just to stretch it and see what it’s good at. I haven’t found a source that it’s bad at so far, and it’s been pretty varied - as a drum overhead it shines, the top end on it is perfect for that, it’s not too hyped so it doesn’t make anything sound harsh but the transient response is gorgeous. Guitar amps have been beautiful and clear through it, and vocals have sounded incredible. It’s an all-rounder certainly.   The thing I like the most about the sound of this 47 is it’s real to me, it sounds real. It’s a little bit flattering but not in a way that removes you from the source at all, it just sounds like a beautifully clear picture of everything you want to hear. I’ve tried a few other emulations and modern tube mics and they tend to have this kind of hyped top-end or overly reinforced low-end to try and make something sound more widescreen, but if you’re recording a good source you want the mic just to do it justice and not to mess with it too much then the GA-47 does that fantastically.”
Golden Age Premier UNITE ...

895,-

995,-

Mounting two PREMIER units in the UNITE PREMIER: Each PREMIER unit is fixed with two screws through the bottom of the unit. Then mount the small panel to fill out the small gap between the units. When mounting one PREMIER unit: Place the unit in the middle of the UNITE PREMIER and mount it with two screws. Then mount the two side panels to the left and right of the unit. The other parts are only used when mounting our red units in the UNITE PREMIER.  
Lewitt MTP 350 CM Handheld ...

1.879,-

2.079,-

  Clear and precise condenser sound The MTP 350 CM is a vocal condenser microphone with a lightweight diaphragm condenser capsule. This brings a high level of sonic clarity to your vocal performance. Durable materials for longevity To make sure your beloved microphone survives even your roughest touring routines, the enclosure is made out of durable zinc die-cast parts. A rubber-suspension protects the capsule while minimizing unwanted handling noise. The built-in wind and pop-filter prevents hissing sounds and plosives. On top of that, the capsule is protected from moisture. Cardioid polar pattern Its cardioid polar pattern picks up sound coming mainly from the front of the microphone. Sound coming from directly behind the mic is dampened to guarantee high monitor levels. A solid show is assured as you don't have to worry about nasty feedback issues. What’s in the box? The MTP 350 CM comes with a snap-in mic clip, a windscreen and a transport bag. Specifications             Frequency range:  90 … 20,000 Hz             Sensitivity: 3.1 mV/Pa, -50 dBV/Pa             Self-noise: 25 dB (A)             Max SPL for 0.5% THD: 141 dBSPL             Polar pattern: Cardioid             Included: Mic clip, windscreen, transport bag             Microphone dimensions: 49 dia. x 175 mm, 1.9 dia. x 6.9 in             Microphone net weight: 330 g, 11.6 oz Box contents             MTP 350 CM – Condenser vocal microphone             DTP 40 Lb - Cushioned mic bag             DTP 40 MCs - Microphone clip             Windscreen
Warm Audio WA-87JR Nickel

3.790,-

4.090,-

  The WA-87jr is a contemporary version of the iconic ‘87-style microphone, the most sought after mic for studio vocals, with a modern circuit design and professional recording features. Combining a transformerless modern circuit with a premium recreation of the vintage dual-backplate K87 capsule, WA-87jr delivers pristine highs, detailed mids, and rich analog tone with low self-noise. Three selectable polar patterns: cardioid, figure-8, and omnidirectional, provide needed flexibility for recording vocals, podcasts/streaming, and all types of instruments. The WA-87jr delivers one of the most legendary analog microphone sound profiles with professional recording features at an unthinkable price.   Classic Studio Sound, Contemporary Design: The WA-87jr is a contemporary version of the iconic ‘87-style microphone, delivering pristine highs and detailed mids with a modern multipattern condenser design. Combining possibly the greatest vocal condenser capsule tone of all time with carefully designed contemporary circuitry, the WA-87jr delivers professional analog tone on sources like vocals, streaming/podcasting, acoustic guitar, drums, and much more. Vintage-Accurate K87-Style Capsule: The WA-87jr features a true reproduction of the celebrated dual-backplate, large-diaphragm K87-style capsule found in the most sought-after ‘87 microphones. Designed with the same hole pattern and frequency response as the original studio mic using a discrete signal path with ultra-low self-noise, WA-87jr delivers pristine, professional tone perfect for vocals, streaming/VO, instruments, and more. Selectable Polar Patterns, Pad & Filter: The WA-87jr features three selectable polar patterns: cardioid, omnidirectional, and figure-8. Multiple patterns allow for precise control over the focus of the mic, from intimate "close" tones to capturing the natural ambiance of a room. The built-in pad and high-pass filter increase flexibility by making it easy to capture loud sources and reducing unwanted low-frequency noise. Together, these features make the WA-87jr a highly versatile microphone suited for a wide range of recording situations. Professional Accessories: All WA-87jr’s include a professional shockmount to reduce noise while recording, hardmount for minimalist mounting, and leather storage case for travel and storage. Hand-Tested In Austin, TX: Like all Warm Audio gear, every single WA-87jr is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.   Tech Specs - Contemporary Version Of The 87-Style All-Time Studio Vocal Mic - Large-Diaphragm FET Transformerless Condenser Microphone - Includes: Shockmount, Hard Mount, Leather Storage Pouch - Gold-Sputtered, Large-Diaphragm, Dual-Backplate, K87-Style Capsule - Fully Discrete Signal Path - Self-Noise: 9dBA | Dynamic Range: 116dBA - Sensitivity: 10mV/Pa Or -40dB
Austrian Audio OC-S10

29.690,-

32.290,-

  Discover Excellence. The OC-S10 is a reference large-diaphragm condenser microphone, meticulously designed for recording lead vocals and solo instruments with unparalleled precision. With five selectable polar patterns, three low-cut filter options, and switchable -10dB and -20dB pads, the OC-S10 offers exceptional versatility to suit any recording scenario. In combination with the dual-output feature (both standard XLR) it provides maximum post-production flexibility, ensuring you can discover and craft your perfect sound. The included shock mount features a ball-joint connection for precise and delicate positioning, making setup effortless. Additionally, the magnetically attached metal mesh filter (not shown) effectively reduces unwanted plosive sounds while preserving the full richness and detail of the vocal spectrum. Made in Vienna / Austria. More information soon – stay tuned! Technical Specifications Directional characteristic (Multi)Omni, Wide Cardioid, Cardioid, Hypercardioid, Figure-of-Eight Frequency range20 Hz - 20 kHz Sensitivity (all directions)14 mV/Pa Equivalent noise level8 dB SPL (A)  Max SPL147 dB SPL (157 dB SPL) Analog low cut filter40 Hz, 80 Hz, 160 Hz (all second order)  Switchable pad-10 dB, -20 dB Impedance108 Ω (symmetrical) Load impedance> 1 kΩ Supply voltage48 V (<2.5 mA) Connectors2x XLR 3 pin Dimensions63 x 63 x 205 mm Weight690g
Golden Age Premier GA-251 MK ...

21.995,-

26.995,-

NB:Velg frakt for stort kolli på denne! High End, no compromise components and build quality Hand Made in small series, 50 units at a time Capsules selected with very tight tolerances Point-to point wiring with silver-plated wires, no printed circuit board used All soldering points made with Mudorf Msolder Supreme SilverGold solder (Sn88, 6Cu, 1,8Ag, 9,5Au Solid wood microphone box, tweed style system flight case. Every mic, box and psu has a badge with the serial number. The Telefunken ELA M 250/251 was made for Telefunken by AKG after Neumann discontinued its OEM production of the Telefunken U-47. The Golden Age Premier GA-251 is inspired by this truly classic mic model.  The GA-251 shares the same design goal that was set for the GA-47: to offer the classic qualities and advantages that a vintage unit in perfect condition would provide and doing so at a very low price point. Having gone through a number of prototypes that was compared to great sounding vintage units in different recording settings, everyone involved agreed that the goal was reached. Its a great pleasure for me to present the second mic in the Golden Age Premier line, the GA-251! It is shipping now and has an international price of 1 699 USD. Bo Medin, October 2018 GA-251 build info Mic body and grille The mic body is made of brass, the grille is made of iron. The grille, which is a critical component affecting the sound character, is similar to the one in the 251.  Capsule  The GA-251 uses a 34 mm K251 style capsule. Being a dual-sided one, it provides both cardioid and omni polar patterns. In order to get a good consistency between units, for each production run of 50 pcs GA-251 units, approximately 200 capsules is evaluated in order to find 50 capsules with specifications that lie within the tight tolerances. Specifications: Backplate material: brass Capsule diameter: 34 mm Membrane diameter: 34 mm Membrane material: 6 micron gold-coated mylar. The sensitivity of the front and back side of the capsule do not differ more than 0,3 dB. The sensitivity between different capsules do not differ more than 0,5 dB. The tight manufacturing tolerance will lead to a very good consistency between different GA-251 units. The capsule is specially designed to complement the electronic circuit of the GA-251 to achieve a frequency response curve with a nice balance between the high, middle and low frequencies. The result is a very smooth sound with a warm bottom and airy top end just like ELA M251. Tube The GA-251 uses a NOS Phillip 5480W super low noise pentode tube connected in triode mode in order to decrease the noise. The tube has the following character: - balanced sound response  - a smooth and warm sound character and a low noise level - long lifespan The GA-251 amplifier features a new proprietary circuit designed around the NOS 5840W tube. Output transformer The GA-251 transformer is specially designed with a 10:1 AMI style dual bobbin transformer. It is made from permalloy steel sheet from USA and enamelled wire from Germany. It offers a wonderful sound character with a high resolution and great balance between the low, middle and high frequency bands. Capacitors and resistors The coupling capacitor is made by Solen from France. It is a high balanced film capacitor made from MKP material with pure oxygen-free copper connections. It has a very delicate and balanced sound. The capsule capacitor uses NOS Siemens antique grade polystyrene capacitor to reduce loss. The tube cathode bypass capacitor uses an ELNA OFC Cerafine high end hifi capacitor from Japan with oxygen free copper connections exhibiting a very sweet and delicate character, not the least for vocals. The other capacitors are of the low loss polystyrene type. The resistor used for setting the capsule voltage is a high quality DALE 1% metal film resistor. The result is a very stable and consistent operating level leading to better consistency between different GA-251 units. The plate resistor uses a non-inductive resistor of the United States IRC audio with pure copper connections. The sound level is rich and full bodied. Mic interior The electronic circuit is built with point-to point wiring, All soldering points made with Mudorf Msolder Supreme silvergold solder All of the inside wire use pure silver wire and decrease the loss during the circuit transmission, also it can ensure the sound quality is transparent. All components which are connect to electrical ground is connected to the ground plane on the circuit board. All other component connections use point to point wiring which results in virtually zero loss and crosstalk. Power supply transformer and electrolytic capacitors The vintage style power supply PSU uses a high power R-style transformer with a low noise level and minimum stray field. A simple but effective circuit uses dual-stage filtering for the filament voltage. The High voltage is also precisely filtered and stabilized using an ON semiconductor zener diode. The polar pattern switch is placed on the power supply so that the recording engineer can change the polar pattern between Cardioid and Omni remotely. A ground lift switch will help to solve mains power related noise issues that can appear in some cases Mic cable     The cable is specially produced using 99,99% pure oxygen-free copper, Teflon insulation, tin foil and 98% kitmesh, ie with a very high braided density of the cable shield. It has a very open and smooth sound. The mic connector is an aviation style plug providing solid connections and a long life. 
Lauten Audio RIm Mount

1.340,-

1.490,-

  Rim Mount’s shock-absorbent design and fully articulating arm system allow you to easily mount and optimally place microphones on the rim of almost any drum. 
Lewitt MTP 350 CMs Handheld ...

1.879,-

2.079,-

  Clear and precise condenser sound The MTP 350 CMs is a condenser vocal microphone with a lightweight diaphragm condenser capsule. This brings a high level of sonic clarity to your vocal performance. Durable materials for longevity To make sure your beloved microphone survives even your roughest touring routines, the enclosure is made out of durable zinc die-cast parts. A rubber-suspension protects the capsule while minimizing unwanted handling noise. The built-in wind and pop-filter prevents hissing sounds and plosives. On top of that, the capsule is protected from moisture. Cardioid polar pattern Its cardioid polar pattern picks up sound coming mainly from the front of the microphone. Sound coming from directly behind the mic is dampened to guarantee high monitor levels. A solid show is assured as you don't have to worry about nasty feedback issues. What’s in the box? The MTP 350 CMs comes with a snap-in mic clip, a windscreen and a transport bag. Specifications             Frequency range:  90 … 20,000 Hz             Sensitivity: 3.1 mV/Pa, -50 dBV/Pa             Self-noise: 25 dB (A)             Max SPL for 0.5% THD: 141 dBSPL             On/off switch: Yes             Polar pattern: Cardioid             Microphone net weight: 330 g, 11.6 oz Box contents             MTP 350 CMs – Condenser vocal microphone             DTP 40 Lb - Cushioned mic bag             DTP 40 MCs - Microphone clip             Windscreen
Warm Audio WA-87JR Black

3.790,-

4.090,-

    The WA-87jr is a contemporary version of the iconic ‘87-style microphone, the most sought after mic for studio vocals, with a modern circuit design and professional recording features. Combining a transformerless modern circuit with a premium recreation of the vintage dual-backplate K87 capsule, WA-87jr delivers pristine highs, detailed mids, and rich analog tone with low self-noise. Three selectable polar patterns: cardioid, figure-8, and omnidirectional, provide needed flexibility for recording vocals, podcasts/streaming, and all types of instruments. The WA-87jr delivers one of the most legendary analog microphone sound profiles with professional recording features at an unthinkable price.   Classic Studio Sound, Contemporary Design: The WA-87jr is a contemporary version of the iconic ‘87-style microphone, delivering pristine highs and detailed mids with a modern multipattern condenser design. Combining possibly the greatest vocal condenser capsule tone of all time with carefully designed contemporary circuitry, the WA-87jr delivers professional analog tone on sources like vocals, streaming/podcasting, acoustic guitar, drums, and much more. Vintage-Accurate K87-Style Capsule: The WA-87jr features a true reproduction of the celebrated dual-backplate, large-diaphragm K87-style capsule found in the most sought-after ‘87 microphones. Designed with the same hole pattern and frequency response as the original studio mic using a discrete signal path with ultra-low self-noise, WA-87jr delivers pristine, professional tone perfect for vocals, streaming/VO, instruments, and more. Selectable Polar Patterns, Pad & Filter: The WA-87jr features three selectable polar patterns: cardioid, omnidirectional, and figure-8. Multiple patterns allow for precise control over the focus of the mic, from intimate "close" tones to capturing the natural ambiance of a room. The built-in pad and high-pass filter increase flexibility by making it easy to capture loud sources and reducing unwanted low-frequency noise. Together, these features make the WA-87jr a highly versatile microphone suited for a wide range of recording situations. Professional Accessories: All WA-87jr’s include a professional shockmount to reduce noise while recording, hardmount for minimalist mounting, and leather storage case for travel and storage. Hand-Tested In Austin, TX: Like all Warm Audio gear, every single WA-87jr is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.   Tech Specs - Contemporary Version Of The 87-Style All-Time Studio Vocal Mic - Large-Diaphragm FET Transformerless Condenser Microphone - Includes: Shockmount, Hard Mount, Leather Storage Pouch - Gold-Sputtered, Large-Diaphragm, Dual-Backplate, K87-Style Capsule - Fully Discrete Signal Path - Self-Noise: 9dBA | Dynamic Range: 116dBA - Sensitivity: 10mV/Pa Or -40dB
Viser 31 til 45 (av 117 produkter)
  • vipps-orange.png
  • klarna-dark.png
  • mastercard-full.png
  • visa.png