Til kassen
Totalt: 0

Meny

Handlekurv / 0 produkter

Handlekurven er tom

Usikker på hvor du skal starte?
Se våre nyheter
TOTALT 0,-

Wes Audio _Titan NG 500 Bundle w/Calypso 8 chn AD/DA Converter

Wes Audio

På lager: 1
28% Rabatt
26.995,-
19.495,-

Tilbudet slutter

Vennligst velg

 

Wes Audio _Ttan Bundle With Calypso 8 channel AD/DA Converter

NB:Velg frakt stort kolli på denne!

_TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It extends 500 series connector with additional pins where modules can be designed to support digital recall or any other vendor specific functionalities. This extension is part of new open standard ng500 Next Generation 500 series which allows other manufacturers to design and implement digitally controlled analog devices.

We are proud to present _TITAN  Future of analog processors.

 

HIGH END LINEAR POWER SUPLY

Linear power supply capable to deliver 5A of power will bring sound of your units to the next level!

 

10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*)

_TITAN can host standarized 500 series module (Please read Important Note below).

Of course it was designed to recall up to 10 units with signle USB or Ethernet connection!

 

CONTROL ALL MODULES THROUGH ONE CONNECTION!

_TITAN allows to control/recall all hosted modules through one connection:

1) USB for direct connection with your workstation.

2) Ethernet dedicated LAN connection to access all devices in your local network.

 

REMOTELY CONTROLED STEREO LINKS

_TITAN provides simple standalone application to change status of stereo links between modules.

No more problems with accessing your chassis configuration!

 

IAC INTERNAL AUDIO CONNECTOR

At slot number 10, _TITAN implements special connector, which routes all audio signals from and to, slots 1 8.

This allows future integration with audio interface modules, analog summing modules or patchbays.

INPUT source for any slot is implemented through analog relays, and it is configurable through standalone application. This prevents two different signal sources to be routed to the same module.

 

Features summary:
 10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*),
 HIGH END LINEAR POWER SUPLY capable to deliver 5A of power,
 CONTROL/RECALL ALL MODULES THROUGH ONE CONNECTION,
 OPEN SPECIFICATION (**)  documentation and software framework including communication drivers for
any Vendor that would like to adopt to this standard,
 REMOTELY CONTROLED STEREO LINKS through standalone application,
 IAC INTERNAL AUDIO CONNECTOR  for future integration with audio interface, summing modules or patchbays,
Other features: 
 Stereo links are integrated with modules, and pressing Link button on modules which  supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
Remote firmware upgrade _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
 XLR sockets in/out for each slot.
 Internal stereo link switches which can be also managed through GConManager  standalone application.
 Power mode switch 115V/230V.

 


_CALYPSO is an audio interface designed to work in 500 series enclosure. It features state of art 8 channels of AD/DA conversion and perfectly integrates with ng500 chassis _TITAN, through I.A.C. connector. Besides its very convenient integration with ng500 chassis, it still can be used in standard 500 series enclosure using two DB25 connectors.


Standard 500 chassis support!

_CALYPSO is designed to work with standard 500 series enclosures, in that case DB-25 connectors on the front panel can be used to route audio signal to and from chassis.

DB-25 connectors can be also used to route audio signal from and to outboard gear!

Convinient Plug-in for I.A.C. recall and more!

_CALYPSO as all ng500 units is integrated with VST2/VST3/AAX/AU plug-ins. While using with a _TITAN it allows to manage I.A.C. connector in other words it manages input source to each module to be either back XLR IN socket, or I.A.C. direct connection to _CALYPSO. This gives You totally recallable solution to route your signal differently based on DAW session. For more information please refer to examples section below! Plug-in supports:

    Convinient metering,
    Full unit control,
    I.A.C. recall and management!
    Sample rate selection based on DAW session
    For more information please refer to manual!


LCD screen with metering!

Calypso LCD screen will allow You to see all configuration options and manage the unit.
1) Channel numbers
2) Metering _CALYPSO supports very fast and accurate PPM metering
3) Clip indicator.
4) Currently active Sample Rate.
5) Source of Sample Rate configuration
6) Clock Source
7) Clock sync status
8) H-LINK indication if DAW plug-in is connected to this particular hardware instance.


Features summary:

24bit conversion
Supported sample rates: 44.1kHz, 48kHz, 88.2kHz(SMUX), 96kHz(SMUX)
Ultra low jitter clock
Word clock IN/OUT
Full integration with _TITAN via IAC connector (Just ADAT cables are need to route all signal to and from chassis)
Two DB25 connectors allows integration with any 500 series chassis
Two converter reference levels +8dBu/-10dBV
LCD screen with channel metering

Specification:

Power consumption: 150mA per rail
Dimensions : 76x133x158mm
Warranty: 2 years

Inputs(ADC):
Freq. response 20Hz-20kHzm +/- 0.1dB
THD+N (unweighted): -108dB (0.0004%)
Dynamic range (unweighted): 116dB
Gain Settings: +4 dBu / 10 dBV (selectable per input)
Maximum Input Level: (+4 dBu) +20 dBu
Input Impedance: 10K Ohms
Connector type: DB25/IAC

Outputs(DAC):
Freq. response 20Hz-20kHzm +/- 0.1dB
THD+N (unweighted): -105dB (0.0005%)
Dynamic range (unweighted): 115dB
Gain Settings: +4 dBu / 10 dBV (selectable per output)
Maximum Output level: (+4 dBu) +20dBu
Output Impedance: 100 Ohms
Connector type: DB25/IAC


https://wesaudio.com/product/_titan/