Barefoot Footprint 02 Gen2(Par)

NB:Prisen er pr.par!   FOOTPRINT ® 02 GEN2 6.5-INCH DUAL-FORCE™ TRI-AMPLIFIED 3-WAY ACTIVE MONITOR     • Tri-amplified 3-way Monitor • 410 watts of power per monitor • Frequency Response:38Hz – 40kHz • MAX SPL: Continuous ≥111dB • Crossover Frequencies 180 / 3700 Hz • 6.5″ Dual-Force™ aluminum cone woofers • 5″ Aluminum cone midrange • 1″ Dual ring radiator tweeter • MEME™ Technology Voice Emulation • SPOC™ Technology • Dims 13.54″ L x 9.12″ W x 12.45″ D • $3,495.00 USD (pair)       THE STORY   The   Footprint ® 02 Gen2   continues the evolution of Barefoot Sound’s acclaimed monitor lineup, delivering the same high-performance DNA as the flagship models in a more compact and accessible form. While the original Footprint ® 0 2 carved out its place as the mid-sized solution in the Footprint ®  series, the Gen2 takes things further with reengineered drivers, updated DSP, and refined cabinet acoustics, all designed to offer stunning accuracy and sonic integrity in smaller studio spaces. Like its larger sibling, the Footprint ® 02 Gen2 features a fully tri-amplified 3-way system with dedicated Class D amplification for each driver. A powerful 1-inch dual-ring radiator tweeter, a precision-engineered 5-inch aluminum cone midrange, and dual 6.5-inch aluminum cone   Dual-Force™ Technology   woofers work together to deliver seamless crossover transitions, improved transient response, and high output with minimal distortion. Each component has been upgraded for enhanced linearity, deeper low-end extension, and sharper midrange clarity, making the Gen2 ideal for mixing, mastering, and immersive setups where space efficiency matters. At the core of the Footprint ® 02 Gen2 is Barefoot’s patented   SPOC™   (SPectrally Optimized Conversion)   Technology , which places analog filtering ahead of digital conversion for improved signal-to-noise ratio, greater resolution, and more transparent high-frequency reproduction. Combined with a new low latency DSP engine, the result is more precise imaging, extended bass, and accurate real-world translation. The cabinet design has also been refined with increased internal volume, optimized damping, and enhanced rigidity, all housed in the signature sealed MDF enclosure finished in Barefoot’s iconic textured gray coating. This rugged, elegant design ensures clean, tight low-end performance without the artifacts often introduced by ported systems. The Footprint ® 02 Gen2 also features Barefoot’s   MEME™   (Multi Emphasis Monitor Emulation)   Technology , enabling you to instantly switch between multiple reference speaker types from consumer speakers to vintage mix cubes without changing your monitoring position. Whether you’re building a stereo setup or crafting a compact immersive system, the Footprint ® 02 Gen2 delivers flagship Barefoot performance in a space-efficient form factor. With its unmatched balance of power, precision, and size, it stands as the ideal middleweight solution in the Footprint ®  series.   DRIVERS REIMAGINED   The Footprint ® 02 Gen2 introduces redesigned drivers powered by a tri-amplified Class D architecture for maximum precision, clarity, and power. With less than 0.005% THD at full output, the system delivers seamless crossover performance and pristine, well-balanced sound across the entire frequency spectrum.   DUAL-RING TWEETER The 1” dual ring radiator tweeter features a powerful magnet and motor system for longer excursion, higher output, and reduced compression, delivering dynamic and detailed performance. An improved heat-sink ensures stable operation during extended use, while copper shorting rings minimize distortion for pristine accuracy. Its fabric diaphragm, aluminum housing, and solid face plug add rigidity and resonance control, and neodymium technology enhances clarity and fidelity. Powered by a dedicated 60W amplifier           ALUMINUM CONE MIDRANGE The Footprint ® 02 Gen2 5” midrange driver employs an aluminum cone for rigidity and resonance control, improving audio fidelity. A larger high-sensitivity motor with copper shorting rings reduces harmonic distortion for clean, accurate sound. With extended excursion and an advanced motor system, the driver delivers higher output with minimal compression, while an improved heat-sink ensures reliable performance. Powered by a dedicated 150W amplifier.         DUAL-FORCE™   WOOFERS At the core of the Footprint ® 02 Gen2’s low end are dual 6.5” aluminum woofers mounted in rugged cast frames. Using Barefoot’s Dual-Force™ Technology, they cancel vibrations and reinforce cabinet rigidity, producing controlled bass down to 38 Hz. Powered by Class D amps delivering 200W total, their advanced motor design with copper shorting rings and extended excursion maintains clarity at high levels. A new heat-sink system ensures consistent performance in demanding sessions.